ATP INC. AUTO TRANS FLUSH AT-200 (5147)

MATERIAL SAFETY DATA SHEET

Manufacturer’s Name and Address

Life Automotive Products, Inc.
500 Industrial Park Drive
Selmer, TN 38375


Emergency Telephone No.
(770) 433-0210 M – F(8am -5pm)
(800) 255-3924(24 Hr Emergency)

Date Revised:
August 10, 2011

Supercedes:
Feb. 17, 2004

HMIS Symbol:
Health   1
Flammability   1
Reactivity   0


Section 1 - IDENTITY
Common Name: (used on label)
(Trade name & Synonyms)
ATP INC. AUTO TRANS FLUSH AT-200 (5147)
   
Chemical Name Mixture packaged in pressurized aerosol spray can.
 
Section 2 - HAZARDOUS INGREDIENTS

Principal Hazardous Component(s)

CAS No.

OSHA PEL

ACGIH TLV

Other Limits

*2-Butoxy Ethanol

111-76-2

50 PPM

20 PPM

25 PPM

Dimethyl Ether

115-10-6

No Est.

1000 ppm

 

*Section 313 Supplier Notification - Indicates hazardous ingredients which are toxic chemicals subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 and of 40 CFR 372.

Section 3 - PHYSICAL & CHEMICAL CHARACTERISTICS

Boiling Point

>200°F

% - VOC 26.0%
Solubility in Water Soluble
Specific Gravity (H2O=1) 0.99 – 1.00g/ml
Evaporation Rate (BuAc=1) <1.00
Appearance and Odor Clear Liquid with a mild odor
Vapor Pressure (Propellant) Not Est.
pH 8.00 – 9.00
 
Section 4 - FIRE & EXPLOSION DATA
Flammability per
Flame Projection Test
Method

Non-Flammable Flammable Limits in Air (Propellants) Lower
N/A
Upper
N/A
Extinguisher
Media
   
Special Firefighting Procedures: Keep containers cool using water spray. Use proper equipment to protect personnel from bursting containers.
   
Unusual Fire and Explosion Hazards: Contents under pressure. Do not expose to temperatures exceeding 120° F as containers may vent, rupture or burst.
 
Section 5 - PHYSICAL HAZARDS
Stability: Stable
Conditions to Avoid: Open Flames; Temp. > 120° F.
Hazardous Polymerization Will not occur
Incompatibility (Materials to Avoid): Strong oxidizing agents
Hazardous Decomposition Products CO, CO2, Ammonia Vapors
Section 6 - HEALTH HAZARDS

Routes of Entry      Inhalation: YES     Eyes/Skin: YES     Ingestion: UNLIKELY

 
   
Signs and Symptoms of Exposure (Acute & Chronic)  
  Inhalation: High concentrations of vapors may irritate nose and throat and cause symptoms of intoxication such as dizziness, nausea, or headache.
  Eye Contact: Direct spray or vapors will irritate eyes.
  Skin Contact: Product may cause irritation such as de-fatting of the skin.
  Ingestion: May cause gastrointestinal irritation.
   
Medical Conditions Generally Aggravated by Exposure None Known
   
Chemical Listed as Carcinogen or Potential Carcinogen  
  National Toxicology Program No
  I.A.R.C. Monographs No
  OSHA No
   
Emergency and First Aid Procedures  
  1. Inhalation Remove victim to fresh air. Apply artificial respiration if needed. Get medical attention if necessary.
  2. Eyes Immediately flush eyes with water for at least 15 minutes. Get medical attention if irritation develops.
  3. Skin Remove contaminated clothing and wash skin with soap and water. Get medical attention if irritation develops.
  4. Ingestion Do not induce vomiting unless directed to do so by a physician or poison control center. Get medical attention.
 
Section 7 SPECIAL PROTECTION INFORMATION
Respiratory Protection (Specify Type) Use respirator only as a last resort to control exposure.
Ventilation Local Exhaust Maintain adequate ventilation.
Mechanical (General) N/A
Special N/A
Other N/A
Protective Gloves Chemical Resistant Gloves
Eye Protection Safety Glasses or Goggles
Other Protective Clothing or Equipment Wash hands after use.
 
Section 8 - SPECIAL PRECAUTIONS AND SPILL/LEAK PROCEDURES
Precautions to be Taken (Handling and Storage) Use with adequate ventilation. Keep out of reach of children. Do not store at temperatures above 120°F. Do not puncture or incinerate containers. Store in
accordance with NFPA 30B for Level 1 Aerosol
Other Precautions Read label precautions carefully. Follow label directions to avoid injury.
Steps to be Taken in Case Material is Released or Spilled Absorb spill with inert material then place in a chemical waste container. Dispose of spill material in accordance with local, state or federal regulations.
Waste Disposal Methods Dispose of in accordance with local, state, and federal regulations.
Transportation Info

DOT CLASSIFICATION: HAZARDOUS
PROPER SHIPPING NAME: CONSUMER COMMODITY ORM-D
UN NUMBER: UN 1950    HAZARD CLASS: 2.1
PACKING GROUP: N/A

 

We believe all information given is accurate. It is offered in good faith, but without guarantee. Since conditions are beyond our control, user assumes all responsibility and risk.

 
Close Window