Product Trade Name: AT204 - Lube Packets - 1 oz.
MATERIAL SAFETY DATA SHEET
(Revision Date: 09/15/2009)
Section 1 PRODUCT AND COMPANY IDENTIFICATION
Company Identification
Life Automotive
500 Industrial Park Drive
Selmer, TN 38375-3276
United States of America
Emergency Response
North America: CHEMTREC (800) 424-9300 after 5:00pm CST
Or (703) 527-3887
Health Emergency
USA: (800) 264-6457 or (731) 645-4972
Product Information
MSDS Requests: (800) 264-6457 or (731) 645-4972
Technical Information: (800) 264-6457 or (731)645-4972
General Information: vswedley@spectrumcorporation.com
| Product Family | Petroleum Lubricating Oil |
| CAS Number | Mixture |
2. COMPOSITION AND INFORMATION ON INGREDIENTS
| INGREDIENT NAME LUBRICATING OILS, PETROLEUM, BASE OILS, HIGHLY REFINED POLYUREA THICKENER (TSCA ACCESSION# 26847) *AMINES, TALLOW ALKYL (C14-18 ALKYLAMINES) *This chemical(s) is hazardous according to OSHA/WHIMIS criteria |
CAS No. Mixture**(2) ACC26847 61790-33-8 |
WEIGHT 80-90% 7-13% 0.5-1.5% |
| COMPOSITION COMMENTS | Refer to section eight for exposure limits on ingredients. CAS 64741-88-4; CAS 64741-89-5; CAS 64741-96-4; CAS 64741-97-5; CAS 64742-01-4; CAS 64742-52-5; CAS 64742-53-6; CAS 64742-54-7; CAS 64742-55-8; CAS 64742-56-9; CAS 64742-57-0; CAS 64742-62-7; CAS 64742-63-8; CAS 64742-65-0; CAS 72623-83-7; CAS 72623-85-9; CAS 72623-86-0; CAS 72623-87-1. Carcinogenicity: The petroleum base oils contained in this product have been highly refined by a variety of processes including solvent extraction, solvent dewaxing and hydrotreating to remove aromatics and improve performance characteristics. All petroleum base oils contained in this product meet the IP 346 criteria of less than 3 percent PAH's and are not considered carcinogens by IARC, NTP or OSHA. |
3. HAZARDS IDENTIFICATION
|
|
EMERGENCY OVERVIEW |
| Exposure to vapors generated at high temperatures may cause respiratory irritation. | |
| SENSITIZATION | No known information. |
| CARCINOGENICITY | IARC-2B listed substance:CAS# 4,4' Methylenedianiline, < 10ppm. |
| HEALTH WARNINGS | INHALATION. Heating can generate vapors that may cause respiratory irritation, nausea and headaches. Inhalation hazard at room temperature is unlikely due to the low volatility of this product. SKIN CONTACT. Repeated or prolonged contact can result in drying of the skin. EYE CONTACT. Irritating. INGESTION. Can cause stomach ache and vomiting. Main hazard, if ingested, is aspiration into the lungs and subsequent pneumonitis. |
| ROUTE OF ENTRY | Inhalation. Skin and/or eye contact. Ingestion. |
| MEDICAL SYPMTOMS | MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: |
4. FIRST AID MEASURES
|
INHALATION |
Vapor inhalation under ambient conditions is normally not a problem. If overcome by vapor of hot product, immediately remove from source of exposure. Move the exposed person to fresh air at once. For breathing difficulties oxygen may be necessary. Get medical attention if any discomfort continues. |
| EYES | Rinse the eye with water immediately. Continue to rinse for at least 15 minutes. Contact physician if discomfort continues. |
| SKIN | Remove contaminated clothing. Wash skin thoroughly with soap and water. Get medical attention if any discomfort continues. |
| INGESTION | DO NOT INDUCE VOMITING! Get medical attention immediately! |
5. FIRE FIGHTING MEASURES
|
FLASH POINT (°C) |
246 (475°F) Cd OC (Cleveland open cup). |
| FLAMMABILITY LIMIT - LOWER(%) | N/D |
| FLAMMABILITY LIMIT - UPPER(%) | N/D |
| EXTINGUISHING MEDIA | Use: Carbon dioxide (CO2). Dry chemicals, sand, dolomite etc. Alcohol resistant foam. Water spray, fog or mist. |
| SPECIAL FIRE FIGHTING PROCEDURES | Use water to keep fire exposed containers cool and disperse vapors. Water spray may be used to flush spills away from exposures and dilute spills to non-flammable mixtures. Avoid water in straight hose stream; will scatter and spread fire. Keep run-off water out of sewers and water sources. Dike for water control. |
| UNUSUAL FIRE & EXPLOSION HAZARDS | Pressure will increase in over heated, closed containers. |
| HAZARDOUS COMBUSTION PRODUCTS | Acrid smoke/fumes. Oxides of: Carbon. Nitrogen. |
| PROTECTIVE MEASURES IN CASE OF FIRE | Self-contained breathing equipment and chemical resistant clothing recommended. |
6. ACCIDENTAL RELEASE MEASURES
|
PERSONAL PRECAUTIONS |
Minimize skin contact. |
| PRECAUTIONS TO PROTECT THE ENVIRONMENT | Keep product out of sewers and watercourses by diking or impounding. Advise authorities if product has entered or may enter sewers, watercourses or extensive land areas. Assure conformity with applicable government regulations. |
| SPILL CLEAN-UP PROCEDURES | Keep all sources of ignition and hot metal surfaces away from spill. Avoid contact with eyes or skin. Place leaking containers in well ventilated area. If fire potential exists, blanket spill with foam or use water spray to disperse vapors. Contain spill to minimize contaminated area and facilitate salvage or disposal. To clean up spill, flush area sparingly with water or use absorbant material. Avoid discharge to natural water ways. |
7. HANDLING AND STORAGE
|
HANDLING PRECAUTIONS |
Keep away from heat, sparks and open flame. Ventilate well, avoid breathing vapors. Use approved respirator if air contamination is above accepted level. Do not reuse container. Keep lid closed when not in use. Do not store or mix with strong oxidizers. Avoid spilling, skin and eye contact. Eye wash and emergency shower must be available at the work place. |
| STORAGE PRECAUTIONS | Store separate from strong acids and oxidizers. Keep away from heat, sparks and open flame. |
| STORAGE CRITERIA | Chemical storage. |
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
|
COMPONENT |
STD | TWA | STEL | TWA | STEL |
| LUBRICATING OILS, PETROLEUM, BASE OILS, HIGHLY REFINED | OSHA | 5 mg/m3 (oil mist) | |||
| ACGIH | 5 mg/m3 (oil mist) | 10 mg/m3 (oil mist) | |||
| PROTECTIVE EQUIPMENT |  |
||||
| ENGINEERING CONTROLS | Use engineering controls to reduce air contamination to permissible exposure level. | ||||
| VENTILATION | No specific ventilation requirements noted, but forced ventilation may still be required if air contamination exceeds acceptable level. | ||||
| RESPIRATORS | No specific recommendation made, but respiratory protection may still be required under exceptional circumstances when excessive air contamination exists. | ||||
| PROTECTIVE GLOVES | Chemical resistant gloves recommended to prevent prolonged or repeated contact. | ||||
| EYE PROTECTION | Wear splash-proof eye goggles to prevent any possibility of eye contact. | ||||
| PROTECTIVE CLOTHING | Wear appropriate clothing to prevent repeated or prolonged skin contact. | ||||
| HYGIENIC WORK PRACTICES | Wash at the end of each work shift and before eating, smoking and using the toilet. | ||||
9. PHYSICAL AND CHEMICAL PROPERTIES
|
APPEARANCE/PHYSICAL STATE |
Grease. |
| COLOR | Blue green. |
| ODOR | Mild (or faint). Petroleum. |
| SOLUBILITY DESCRIPTION | Insoluble in water. |
| DENSITY | 0.89 Temperature (°C) 15.6 (60°F) |
| VAPOR DENSITY (air=1) | > 5 |
| VAPOR PRESSURE | < 0.1 mmHg Temperature (°C) 15.6 (60°F) |
| EVAPORATION RATE | < 0.01 |
| pH-VALUE, CONC. SOLUTION | N/A |
10. STABILITY AND REACTIVITY
|
STABILITY |
Normally stable. |
| CONDITIONS TO AVOID | Avoid contact with acids and oxidizing substances. |
| HAZARDOUS POLYMERIZATION | Will not occur. |
| POLYMERIZATION DESCRIPTION | Not applicable |
| HAZARDOUS DECOMPOSITION PRODUCTS | Oxides of: Carbon. |
11. TOXICOLOGICAL INFORMATION
|
TOXICOLOGICAL INFORMATION |
No experimental toxicological data on the preparation as such is available. |
| COMPONENT | LUBRICATING OILS, PETROLEUM, BASE OILS, HIGHLY REFINED |
| TOXICOLOGICAL DATA | Carcinogenicity. IP 346 <3% |
| TOXIC DOSE - LD 50 | > 5000 mg/kg (oral rat) |
| TOXIC DOSE - LD 50 SKIN | > 2000 mg/kg (skn rbt) |
| TOXIC CONC. - LC 50 | No Information Available (NIA). |
| COMPONENT | POLYUREA THICKENER (TSCA ACCESSION# 26847) |
| TOXIC DOSE - LD 50 | No Information Available (NIA). |
| TOXIC CONC. - LC 50 | No Information Available (NIA). |
| COMPONENT | AMINES, TALLOW ALKYL (C14-18 ALKYLAMINES) |
12. ECOLOGICAL INFORMATION
|
ECOLOGICAL INFORMATION |
There is no ecological data on the product itself. |
| COMPONENT | LUBRICATING OILS, PETROLEUM, BASE OILS, HIGHLY REFINED |
| COMPONENT | POLYUREA THICKENER (TSCA ACCESSION# 26847) |
| COMPONENT | AMINES, TALLOW ALKYL (C14-18 ALKYLAMINES) |
13. DISPOSAL CONSIDERATIONS
|
DISPOSAL METHODS |
Spilled material, unused contents and empty containeaccordance with local, state and federal regulations. |
14. TRANSPORT INFORMATION
|
DOT HAZARD CLASS |
Non-Hazardous (No label required). |
| IDENTIFICATION No. | N/A |
| REPORTABLE QUANTITY (RQ) | No |
| TDGR SHIPPING NAME | N/A |
| TDGR CLASS | Not Regulated. |
| SEA TRANSPORT NOTES | Not regulated per IMDG. |
| AIR TRANSPORT NOTES | Not regulated per IATA. |
15. REGULATORY INFORMATION
| US FEDERAL REGULATIONS | ||||||||
| COMPONENT | SARA 302 | CERCLA | SARA 313 | |||||
| LUBRICATING OILS, PETROLEUM, BASE OILS, HIGHLY REFINED | No | No | No | |||||
| POLYUREA THICKENER (TSCA ACCESSION# 26847) | No | No | No | |||||
| AMINES, TALLOW ALKYL (C14-18 ALKYLAMINES) | No | No | No | |||||
| REGULATORY STATUS | Not regulated under SARA 302, SARA 313 or CERCLA. | |||||||
| CLEAN AIR ACT | ||||||||
| SARA HAZARD CATEGORIES | None | |||||||
| US STATE REGULATIONS | ||||||||
| COMPONENT | CA | MA | FL | MN | NJ | PA | RI | |
| LUBRICATING OILS, PETROLEUM, BASE OILS, HIGHLY REFINED | Yes | Yes | ||||||
| STATE REGULATORY STATUS | CALIFORNIA PROPOSITION 65: This product may contain the following chemical(s) considered by the State of California's Safe Drinking Water and Toxic Enforcement Act of 1986 as causing cancer or reproductive toxicity, and for which warnings are now required: Benzenamine, 4,4`-methylenebis-, cancer hazard, CAS# 101-77-9, <10 ppm Toluene, developmental hazard, CAS # 108-88-3 <10 ppm | |||||||
| WORKPLACE HAZARDOUS MATERIALS INFORMATION SYSTEM - WHMIS | ||||||||
| This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all the information required by the Controlled Products Regulations. | ||||||||
| LABEL(S) FOR SUPPLY |  |
|||||||
| CONTROLLED PRODUCT CLASSIFICATION | Not a controlled product. D2B - Irritating and/or Chronically Toxic Materials | |||||||
| Risk phrases | R-20 Harmful by inhalation. R-22 Harmful if swallowed. R-36/37/38 Irritating to eyes, respiratory system and skin. R-41 Risk of serious damage to eyes. Xi |
|||||||
| GLOBAL INVENTORIES | ||||||||
| COMPONENT | CAN | US | EU | AUS | JAP | KOR | PHLP | CHN |
| LUBRICATING OILS, PETROLEUM, BASE OILS, HIGHLY REFINED | DSL | Yes | EINECS | Yes | Yes | Yes | Yes | Yes |
| POLYUREA THICKENER (TSCA ACCESSION#26847) | DSL | Yes | EINECS | No | Exmpt | No | No | Yes |
| AMINES, TALLOW ALKYL (C14-18 ALKYLAMINES) | DSL | Yes | EINECS | Yes | Yes | Yes | Yes | Yes |
| USA (TSCA) | All components in this product are listed on the US Toxic Substances Control Act (TSCA) Inventory or are exempt from TSCA Inventory requirements. | |||||||
| CANADA (DSL) | All components in this product are listed on the Canada Domestic Substances List (DSL) or are exempt from DSL requirements. | |||||||
| EUROPE (EINECS/ELINCS/NLP) | All components in this product are listed on the European Inventory of New and Existing Chemical Substances (EINECS), the European LIst of Notified Chemical Substances (ELINCS), or the No Longer Polymers (NLP) list, or are exempt from EU listing requirements. | |||||||
16. OTHER INFORMATION
|
|
NFPA-HMIS HAZARD RATING |
| HEALTH | Irritation, minor residual injury (1) - HMIS/NFPA |
| FLAMMABILITY | Burns only if pre-heated (1) - HMIS/NFPA |
| REACTIVITY | Normally Stable (0) - HMIS/NFPA |
| NPCA HMIS HAZARD INDEX | Slight: Slightly Toxic - May cause slight irritation (1). |
| PERSONAL PROTECTION INDEX | B - Safety Eyewear and Gloves |
| NPCA HMIS FLAMMABILITY INDEX | Burns only if pre-heated (1). |
| NPCA HMIS REACTIVITY INDEX | Normally stable (0). |
| Tariff Code (Schedule B) | 2710.19.3750 Lubricating greases, with or without additives. |
| PREPARED BY | Regulatory Department |
| DATE | 2008-08-14 |
| DISCLAIMER | While the information and recommendations set forth herein are believed to be accurate as of the date thereof, the company makes no warranty with respect thereto and disclaims all liability from reliance therein. |
| * Information revised since previous MSDS version | |
| PRINTING DATE: | 2008-08-15 |