• PRODUCT NAME: AT-205 RE-SEAL Part #AT-212
• MANUFACTURER'S NAME: ATP, Inc.
• ADDRESS: 5940 West Oakton Street Morton Grove, Illinois 60053
• CHEMICAL FAMILY: Hydrocarbon
• EMERGENCY NUMBER: 847/967-6790

• Not A Carcinogen
• OSHA HAZARD CLASSIFICATION (29CFR1910.1200): Combustible Liquid/Irritant
• D.O.T. SHIPPING CLASSIFICATION (49CFR172): Chemicals, Nos

• APPEARANCE & ODOR: Colorless Liquid; Mild Sweet Odor
• SPECIFIC GRAVITY, 60°F: .991
• BOILING POINT, F: 395
• MELTING POINT, F: Not Applicable
• VAPOR DENSITY: Heavier Than Air
• SOLUBILITY IN WATER: Complete
• VOLATILES, VOL %: 100%
• EVAPORATION RATE: Slower Than Butyl Acetate

• FLASH POINT, F (METHOD): 205 (T.O.C.)
• FLAMMABLE LIMITS: Lower 1.2 @ 275°F Upper 23.5 @ 360°F
• EXTINGUISHING MEDIA: Foam, CO2, Dry Chemicals, Water Fog Or Mist
• FIRE FIGHTING PROCEDURES: Keep Exposed Containers Cool. Fire Fighters Should Wear Self-contained Breathing Apparatus.

• EFFECTS OF OVEREXPOSURE:
  • SWALLOWING: Slightly Toxic. May Cause Incoordination, Dizziness, Drowsiness, Headache, Nausea, Slurred Speech, And Stupor.
  • SKIN: Prolonged Contact Causes Mild To Moderate Local Redness And Swelling.
  • SKIN ABSORPTION: No Evidence Of Harmful Effects From Available Information.
  • INHALATION: None Expected From Vapor Generated At Ambient Temperatures.
  • EYES: Excess Redness And Swelling Of the Conjunctiva May Occur. Causes Irritation, As Stinging And Discomfort Or Pain.
• EMERGENCY AND FIRST AID PROCEDURES:
  • EYES: Flush Immediately With Cool, Clean Water For 15 Minutes, Or Until Irritation Subsides.
  • INGESTION: Do Not Induce Vomiting. Seek Immediate Medical Attention.
  • SKIN: Remove By Wiping. Wash With Mild Soap And Water.
  • INHALATION: Remove To Fresh Air. If Breathing Is Stopped, Start Artificial Respiration. Never Give Anything By Mouth To An Unconscious Person. Wash Clothing Thoroughly Before Reuse. If Irrita-tion Develops Or Persists, See A Physician.

• CONDITIONS TO AVOID: Storage Over 130°F
• INCOMPATIBILITY: Oxidizing & Reducing Agents
• DECOMPOSITION PRODUCTS: Oxides Of Carbon, Nitrogen
• HAZARDOUS POLYMERIZATION: Will Not Occur

• STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
  • Absorb Spill On Inert Solid. Prevent Sewer, Drain, And Waterway Contamination.
• WASTE DISPOSAL METHOD:
  • Dispose Of In Accordance With Federal, State, And Local Regulations.

• RESPIRATORY PROTECTION: NIOSH Approved Organic Vapor Type At High Vapor Levels.
• VENTILATION: Keep Vapor Levels Below TLV (SEC. II)
• PROTECTIVE GLOVES: PVC Coated
• EYE PROTECTION: Goggles
• OTHER PROTECTIVE EQUIPMENT : Apron, Eye Wash

• PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:
  • Store In A Cool, Dry Area. Avoid Ignition Sources. Keep Container Closed When Not In Use.
• OTHER PRECAUTIONS: After the container has been emptied, it may contain hazardous residues. Avoid sparks and open flame. Do not cut, puncture, or weld on or near the container. Do not reuse the container for any purpose until properly reconditioned.

The above mentioned information is believed to be correct as of the date hereof. However, no warranty of merchantability, fitness for any use, or any other warranty is expressed or is to be implied regarding the accuracy of these data, the results to be obtained from the use of the material, or the hazards connected with such use. Since the information contained herein may be applied under conditions beyond our control and with which we may be unfamiliar, and since data made available subsequent to the date hereof may suggest modification of the information, we do not assume responsibility for the results of its use. This information is furnished on the condition the person receiving it shall make his own determination as to the suitability of the material for his particular use and on the condition he assume the risk of his use thereof.

• HMIS HAZARD CLASS:
  • Health: 2 (Moderate)
  • Fire: 2 (Moderate)
  • Reactivity: 0 (Least)